Heald Frames Picanol Omni Plus-i Width 340

Product Description:

• This carbon fiber reinforced heald frame is a high-performance shedding component exclusively developed for Picanol Omni Plus-i 340cm wide-width high-speed air-jet looms. It matches DRC 30 electronic dobby drives and supports maximum loom speed up to 850 RPM, with standard slots for C331 heald wires.
  Its core upgrade is the carbon fiber composite reinforcement on upper and lower staves: upper stave width 158mm, lower stave width 124mm, with integrated center support installed in the middle section, which thoroughly solves sagging and deformation issues of ultra-wide 3400mm frames under high-speed reciprocating motion. The main frame is extruded from aerospace-grade aluminum alloy, with carbon fiber laminated on top and bottom beams, realizing lightweight design and ultra-high bending resistance at the same time. Yellow elastic anti-collision strips are fitted on two sides to absorb high-speed impact and protect both frame and loom accessories.
  Stainless steel integrated slotted rails are adopted for heald wires, perfectly compatible with C331 healds, delivering smooth sliding without jamming, rust or burrs after long-term operation. All overall dimensions, hanging holes and connection points are 1:1 replicated to original factory standard, enabling direct replacement without any loom modification. Designed for continuous high-speed weaving of wide home textiles and decorative fabrics, the frame generates minimal vibration at 850 RPM, maintains stable shedding stroke, and significantly reduces weaving defects including warp breakage, weft skew and uneven texture. It is a premium replacement spare part for equipment upgrade and daily maintenance of wide-width Picanol looms.3592-158-124-331C

Features:

• Carbon fiber reinforced beams + central middle support: 158mm wide upper stave & 124mm wide lower stave plus center support eliminate sagging and deformation for 340cm wide frames under 850 RPM high-speed operation.
  1:1 original matching compatibility: Fully fit Picanol Omni Plus-i loom, DRC30 dobby drive and C331 heald wires, direct replacement without loom adjustment or modification.
  Lightweight & high-strength material: Aerospace aluminum alloy laminated with carbon fiber, light weight and excellent anti-fatigue bending resistance, service life increased by over 60% vs ordinary aluminum frames.
  Stainless steel heald rails: Integral slotted structure, wear & rust resistant, smooth heald sliding to avoid warp breakage caused by wire jamming.
  Side anti-collision buffer strips: Absorb impact from high-speed reciprocating movement, reduce frame collision abrasion and operating noise.
  Special structure for wide mass production: Customized for 340cm width home textile & decorative fabric production lines, stable shedding precision and lower fabric defect rate.

Technical Parameters:

Applications:

• Carbon fiber heald frame is exclusively matched with Picanol Omni Plus-i 340cm wide air-jet looms, compatible with DRC30 electronic dobby drives and maximum loom speed of 850 RPM, pre-configured for C331 standard heald wires.
  It is mainly applied to the production of wide-width home textiles, curtain fabrics, sofa cloth, jacquard decorative fabrics and other full-width textiles. The carbon fiber reinforced structure eliminates vibration and sagging of ultra-long frames under high speed, stabilizes shedding timing and stroke, and effectively reduces defects such as warp breakage, weft skew and pattern dislocation to improve finished fabric yield and production efficiency.
  Application scenarios include new loom assembly, upgrade replacement of ordinary aluminum frames on old looms, bulk spare parts purchase for equipment overhaul & maintenance. Compared with standard non-carbon-fiber aluminum frames, it greatly cuts downtime maintenance frequency, ideal for large textile factories with 24-hour non-stop continuous weaving.

Support and Services:

• Accurate loom matching verification: Check Picanol Omni Plus-i loom and 340cm width to prevent wrong purchase.
  Installation & dobby commissioning guidance: Provide bilingual installation manual to guide DRC30 drive hanging, center support positioning and heald threading, troubleshooting shedding vibration and wire jamming.
  1-year official warranty: Free replacement for non-artificial quality defects including beam deformation, delamination and rail cracking caused by normal operation within warranty period.
  In-stock bulk supply & customization: Sufficient permanent stock for standard 340cm frames with full container fast delivery; custom frames with different stave width, loom width and drive connectors are available on request.
  One-stop complete spare parts supply: We can supply matching C331 heald wires, DRC30 dobby parts, roller coverings and all Picanol loom consumables together.
  7×24 online technical support: Quick response to on-site production faults such as high-speed vibration, inaccurate shedding and frame abrasion to minimize downtime loss.

Packing and Shipping:

• Each heald frame is fully wrapped with multi-layer pearl cotton on beams, rails and edges, covered with film to prevent scratch and rust. Internal wooden support blocks are fixed to avoid extrusion deformation during long-distance transit. The whole set is packed into custom solid wooden case with outer dimension 3600*800mm, reinforced with steel belts for compression and drop resistance, suitable for oversea sea freight and overland long-length logistics.
  Compatible loom Picanol Omni Plus-i, width 340cm, quantity and protection marks are clearly printed on wooden box surface for warehouse stocktaking and workshop use.
  In-stock orders will be packed and shipped within 48 hours, domestic full-truck logistics direct to factory; export orders support sea & air freight with full tracking for over-length cargo, ensuring frames delivered without deformation or scratch. Neutral unbranded wooden cases and customer OEM customized packaging are available.

FAQ:

• Q1: Can this heald frame directly replace original Picanol Omni Plus-i frame? Will it sag at 850 RPM high speed?
  A: Direct replacement is fully available, all dimensions, hanging points and drive connectors are identical to OEM parts. Carbon fiber laminated upper/lower staves plus middle center support are specially engineered for 340cm width at 850 RPM, no sagging or bending after long-term high-speed reciprocation.
• Q2: Which heald wire and dobby drive does this frame fit?
  A: Standard matching for C331 heald wires and DRC 30 electronic dobby drive, drives for full loom set, only compatible with Picanol Omni Plus-i 340cm loom.
• Q3: What defects are covered under 1-year warranty? What damages are excluded?
  A: Warranty covers manufacturing defects under normal weaving conditions including beam delamination, aluminum frame crack, rail rust abrasion and dimensional deviation. Damages caused by man-made impact, over-speed operation over , strong acid & alkali corrosion and self-cutting modification are not covered.