Heald Frames Picanol Summum 800 Width 190

Product Description:

• The high-performance core shedding component exclusively designed for Picanol Summum 800 air-jet looms with 190cm width. It is compatible with DRC30 electronic dobby drive system and supports continuous ultra-high-speed weaving above 1000 RPM. Matched with standard C331 heald wires, it is an optimized reinforced accessory for high-density and high-speed fabric production lines.
  This heald frame adopts an advanced composite structure. The upper and lower staves are widened to 152mm and fully laminated with high-strength carbon fiber. Full-length integrated shock-absorbing strips are equipped to effectively solve common defects of ordinary aluminum frames under 1000+ RPM operation, such as severe vibration, structural fatigue deformation, shedding deviation and excessive operating noise. The carbon fiber reinforcement greatly improves bending rigidity and structural stability, while the lightweight design reduces the load on the dobby system, optimizing overall loom operation fluency and production efficiency.
  Equipped with four-corner stainless steel protective plates, this frame is specially upgraded to resist corner collision, abrasion, peeling and deformation caused by long-term high-speed reciprocating movement. It effectively avoids yarn snagging and warp breakage caused by damaged frame corners, greatly extending the service life of the heald frame. The precision integrally formed heald rail features smooth and burr-free surface, ensuring flexible sliding of C331 heald wires and eliminating weaving defects such as yarn jamming, warp breakage and fabric bar marks.
  All mounting holes, hanging dimensions and connection positions are strictly manufactured according to original drawing standards, realizing 100% compatibility and direct replacement for original Picanol Summum 800 heald frames without any loom modification or repeated commissioning. Ideal for mass production of high-density chemical fiber, poplin, stretch fabrics and fine home textiles, it delivers superior stability, wear resistance and durability compared with conventional standard heald frames, serving as an essential upgrade part for high-end loom maintenance and speed improvement.
  
  

Features:

• Carbon fiber reinforcement + full-length shock absorption for 1000+ RPM ultra-high speed: 152mm widened carbon fiber staves with integrated shock-absorbing strips ensure low vibration, zero deformation and low noise during high-speed operation, perfectly matching high-output weaving requirements of Picanol Summum 800 looms.
  Four-corner stainless steel protection for anti-collision and anti-wear: Reinforced stainless steel corner plates effectively prevent corner abrasion, collision damage and yarn snagging during long-term high-speed reciprocating movement, greatly enhancing durability for 24-hour continuous production.
  Lightweight and high-strength composite material: Aerospace aluminum base combined with carbon fiber layer features light weight and excellent anti-fatigue & bending resistance, doubling the service life of ordinary aluminum frames and reducing replacement costs.
  High-precision heald rail eliminates weaving defects: Integrally formed smooth rail fits C331 heald wires perfectly with zero jamming and burrs, effectively reducing warp breakage, fabric density bars and uneven texture.
  1:1 original compatibility, plug and play: Fully compatible with Summum 800 loom and DRC30 dobby drive system, direct replacement without equipment commissioning, minimizing downtime loss.
  High-speed exclusive structural optimization: Optimized structural tension adapts to 1000+ RPM operation, suppresses vibration transmission, protects core dobby components and reduces overall loom failure rate.

Technical Parameters:

Applications:

• High-speed protective heald frame is exclusively designed for Picanol Summum 800 190cm width air-jet looms, perfectly matching DRC30 electronic dobby drive system and C331 standard heald wires. It is specially developed for ultra-high-speed continuous weaving over 1000 RPM, serving as a core upgraded part for high-end precision textile production lines.
  It is widely applied in the production of high-quality fabrics such as high-density poplin, superfine chemical fiber fabric, high-grade shirt fabric, stretch fabric and fine home textile fabric. With carbon fiber shock-absorbing structure and four-corner stainless steel protection, it thoroughly solves industrial points including frame vibration deformation, corner abrasion, unstable shedding and high warp breakage rate under high-speed operation. It effectively stabilizes fabric texture, reduces weft skew and defect rate, and significantly improves fabric grade and production capacity.
  It is suitable for new loom assembly, speed upgrade renovation of old Picanol Summum 800 looms, replacement of aging ordinary heald frames, and bulk stock preparation for annual equipment overhaul. Especially suitable for 24-hour non-stop high-speed mass production in large textile enterprises, it effectively reduces maintenance frequency, cuts downtime and lowers long-term operation and maintenance costs.

Support and Services:

• Professional compatibility verification Strictly verify Model , Picanol Summum 800, 190cm width, DRC30 drive and C331 heald specification to avoid mismatching.
  Installation and commissioning guidance Provide installation manuals to guide dobby positioning, heald threading and structural inspection, solving post-installation vibration, wire jamming and shedding deviation.
  1-year official warranty Free replacement for manufacturing defects such as carbon fiber delamination, frame deformation, rail failure and protective plate falling off under normal working conditions. Damage caused by artificial impact, over-speed operation and unauthorized modification is excluded.
  Bulk in-stock supply and customization Sufficient permanent stock for standard models, support fast full-container export delivery and customized specifications.
  One-stop supporting supply Provide matching C331 healds, DRC30 dobby parts and full-series loom consumables for one-stop procurement.
  7×24-hour online technical support All-weather technical service to troubleshoot high-speed weaving abnormalities and minimize production downtime loss.

Packing and Shipping:

• This high-speed heald frame adopts high-grade customized protective packaging. The whole frame is fully wrapped with thick pearl cotton to protect carbon fiber staves, stainless steel corners and precision rails. Surface film coating prevents dust, rust, scratch and collision during transportation. Internal solid wood fixed supports avoid micro-deformation caused by long-distance extrusion and shaking. The outer solid wooden case is reinforced with steel belts, featuring excellent compression and drop resistance, suitable for land, sea and air cross-border transportation.
  Outer box is clearly marked with Model, compatible loom type, width specification, quantity and protection marks for convenient warehouse management and workshop use. In-stock orders are shipped within 48 hours with direct domestic truck delivery. Export orders support full-traceable logistics to ensure intact delivery without deformation or damage. Neutral packaging and OEM customized packaging are available for cross-border and foreign trade orders.

FAQ:

• Q1: Can this heald frame directly replace the original Picanol Summum 800 frame? Is it stable at 1000+ RPM high speed?
  A: It supports direct and damage-free replacement with fully consistent mounting sizes, hanging points and DRC30 interfaces. Professionally developed for 1000+ RPM ultra-high speed, it maintains stable operation without vibration, deformation or cracking thanks to carbon fiber reinforcement, shock-absorbing strips and four-corner stainless steel protection, performing much better than ordinary standard frames.

Q2: What heald wire and drive model does this frame adapt to?
A: It is exclusively matched with C331 heald wires and DRC30 electronic dobby drive system, only compatible with 190cm width Picanol Summum 800 air-jet looms and cannot be mixed with other loom configurations.

Q3: What is the function of four-corner stainless steel protection? What faults are covered by warranty?
A: Stainless steel corner plates completely avoid corner abrasion, collision cracking and yarn snagging during high-speed reciprocating movement, greatly extending service life. The 1-year warranty covers non-artificial manufacturing faults such as carbon fiber delamination, frame cracking, rail defects and protective plate falling off. Damage caused by over-speed operation, artificial impact and unauthorized modification is excluded.