Impact Resistant Negative Cam 6D11GF 6D11GA 6F11QF 6F11QA Tsudakoma Spare Parts For TSUDAKOMA 111-111 ZAX

Negative Cam 6D11GF 6D11GA 6F11QF 6F11QA TSUDAKOMA 111-111 ZAX

Product Description:

• This Negative Cam Set for Tsudakoma ZAX Looms is a core control accessory specially designed for the negative shedding mechanism of Tsudakoma ZAX series air-jet looms. Consisting of 4 dedicated cams, it precisely controls the timing of heald frame up/down movement through profile curves to realize warp yarn shedding, serving as a key component to ensure loom weaving efficiency and fabric pattern accuracy.
  The cam bodies are precision machined from high carbon alloy tool steel, with profile curves 1:1 reproduced according to original Tsudakoma standards. The surface is high-frequency quenched for high hardness and wear resistance, showing no wear or deformation during long-term high-speed reciprocating motion, maintaining consistent and stable shedding action. The mounting hole position and keyway dimensions are identical to the original parts, enabling direct replacement without loom modification. The edge heat treatment tempering process effectively eliminates internal stress, preventing cracking and deformation of the cams during long-term operation, adapting to continuous high-speed loom operation conditions.
  The 4 cams in the set correspond to different pattern cycle timings and can be combined according to weaving requirements, suitable for the production of various plain, twill, satin and simple pattern fabrics. The precise profile curves reduce heald frame movement impact, lower loom vibration and noise, reduce warp breakage and fabric defects, and improve weaving continuity and yield rate. It is a cost-effective original-equivalent replacement solution for daily maintenance and part replacement of Tsudakoma ZAX series looms in textile mills.

Features:

• Original Standard Profile Reproduction for Precise Timing: The cam profile curves are machined according to original Tsudakoma ZAX loom standards, with precise shedding timing that fully matches the loom's pattern cycle, eliminating the risk of pattern misalignment and defective fabrics.
  High Carbon Alloy + Quenching Treatment for Wear and Impact Resistance: Made of high carbon alloy tool steel with high-frequency surface quenching, featuring high hardness and wear resistance, showing no wear or deformation during long-term high-speed reciprocating motion, with a service life far exceeding ordinary carbon steel cams.
  4-piece Set Design for Multiple Pattern Adaptation: The 4 cams (6D11GF/6D11GA/6F11QF/6F11QA)in the set correspond to different pattern cycles and can be combined for use, meeting the weaving needs of various fabrics such as plain, twill and satin, with strong versatility.
  Original Mounting Specification for Direct Replacement: The mounting hole position and keyway dimensions are identical to the original parts, enabling direct replacement without loom modification or additional debugging before use.
  Internal Stress Relief Treatment for Long-term Stable Operation: The edges undergo heat treatment tempering to effectively eliminate processing internal stress, preventing cracking and deformation of the cams during long-term operation and ensuring stable shedding action.
  Reduce Loom Vibration and Warp Breakage: The precise profile curves enable smooth transition of heald frame movement, reducing impact and vibration, lowering loom noise, reducing warp breakage rate and improving weaving efficiency.

Technical Parameters:

Applications:

• This Negative Cam Set for Tsudakoma ZAX 111-111 Looms is a core accessory for the negative shedding mechanism of Tsudakoma ZAX series air-jet looms, widely used in loom warp shedding control and serving as a key component for efficient weaving of various simple pattern fabrics.
  It is mainly suitable for the production of plain, twill, satin and simple pattern fabrics with cotton, chemical fiber, blended and other yarns, especially for high-volume, high-speed continuous weaving conditions. By precisely controlling the heald frame movement timing, it can effectively reduce warp breakage and fabric defects, improve weaving efficiency and yield rate, and extend the service life of loom shedding mechanism components.
  It is widely used in daily maintenance, batch part replacement and old equipment upgrading of Tsudakoma ZAX series looms in textile factories. It can perfectly replace original cams of the same specification, restore loom shedding accuracy, and reduce downtime losses caused by cam wear and deformation, serving as a necessary consumable accessory for Tsudakoma air-jet looms in large and medium-sized textile enterprises.

Support and Services:

• Model and Specification Matching Service: Provide one-on-one adaptation consultation, accurately verifying the compatibility of the cams according to the customer's loom model (ZAX series) and part numbers (6D11GF/6D11GA/6F11QF/6F11QA), avoiding selection errors.
  Installation and Commissioning Technical Guidance: Provide detailed Chinese and English installation instructions to guide customers in completing cam installation, shaft sleeve fixing and shedding timing debugging, solving problems such as inaccurate shedding and pattern misalignment after installation.
  1-year Warranty Service: The products provide a 12-month warranty period. Quality problems caused by non-human damage (such as profile wear, cracking, deformation) can be replaced.
  Bulk Stock Support: Sufficient permanent stock for the standard 4 cams, supporting fast delivery of large-batch orders to meet the centralized maintenance and stock preparation needs of textile mills.
  Customization Service: Custom services of the same specification are available according to customers' special loom models and pattern cycle requirements, adapting to niche loom models and special weaving processes.
  7×24-hour After-sales Support: Online technical support all year round to solve adaptation, installation and failure problems, helping customers troubleshoot quickly and avoid production downtime losses.

Packing and Shipping:

• Our negative cam sets adopt professional textile accessory protective packaging to avoid cam profile bumping, surface scratching and deformation during transportation. Each cam is independently placed in a shock-proof foam slot, sealed with a moisture-proof bag, and packed in a thickened hard cardboard box, which is compression-resistant and drop-resistant, suitable for long-distance sea and land transportation.
  The outer box is clearly marked with product part numbers (6D11GF 631551BF/6D11GA 631551BA/6F11QF 631564AF/6F11QA 631564AA), codes (ATKM-0651/0652/0653/0654), compatible loom model (ZAX series), quantity and batch information, convenient for warehouse inventory, storage and on-site use. Custom packaging and OEM packaging are available to meet the needs of cross-border e-commerce, foreign trade orders and brand customers.
  In-stock orders are shipped within 48 hours. Domestic logistics and express delivery are available; cross-border shipping methods include international express, sea freight and air freight with full traceable logistics information to ensure safe and on-time delivery.

FAQ:

• Q1: Which looms is this negative cam set compatible with? Can it directly replace the original parts?
  A: This cam set is specially designed for Tsudakoma ZAX series air-jet looms (Part No. 6D11GF 631551BF/6D11GA 631551BA/6F11QF 631564AF/6F11QA 631564AA). The profile curves and mounting hole positions are identical to the original parts, and can be directly replaced without loom modification.
  Q2: What impact will cam wear have on the loom? How to judge when replacement is needed?
  A: Cam profile wear will lead to inaccurate shedding timing, pattern misalignment, fabric defects and increased warp breakage rate. The basis for judging replacement: fixed-position fabric defects, abnormal heald frame movement noise, excessive shedding height deviation during weaving, or cam profile wear exceeding 0.1mm, it is recommended to replace with cams of the same specification.
  Q3: What is the service life and warranty period of the cams?
  A: These cams are made of high carbon alloy with quenching treatment, which can work stably for a long time under normal working conditions with a service life of tens of thousands of hours. The products provide a 1-year warranty period, and quality problems caused by non-human damage during the warranty period can be replaced.